51.2v 100Ah battery system is suitable for household energy storage, small and medium-sized shopping malls energy storage, using 16 pieces 3.2V 100Ah battery, 16s1p configuration. Built-in Seplos smart BMS supports up to 16 groups of batteries in parallel to achieve higher capacity. Battery voltage calculation: 16 battery voltage sampling test, deviation ± 20mV. Battery and ambient temperature detection: 4 battery temperature sensors, 1 environment temperature sensor, 1 MOS temperature sensor, deviation ± 2 ℃. Communication Interface: PC or intelligent front-end can monitor battery pack data, control operation and set parameters through telemetry, remote communication, remote adjustment, remote control and other commands. The communication protocol meets the requirements of YD/T 1363.3 and implements Cascade communication at the same time. Record, save, and read historical data: when the battery is abnormal, record and save real-time battery status and alarm information. Battery Management System parameter settings: battery management system parameters, including cell battery overvoltage/undervoltage, total battery voltage overvoltage/undervoltage, charge/discharge overcurrent, battery high/low temperature, battery capacity, working mode, charge and discharge limiting current, etc., can be set in the battery monitoring system.