On October 1, 2026, GB/T 47352-2026 "technical specification for power exchange system of electric motorcycles and electric mopeds" was formally implemented. Not long ago, the "working guide for electric bicycle sharing and Power Exchange (Trial)" jointly issued by the three departments has clearly required that the newly replaced battery of the power exchange cabinet must meet the three mandatory standards, the battery collects basic data such as battery voltage, total battery voltage, current, temperature and other basic data as well as fault and warning information in real time during the charging process. The unique code of the battery pack must be a permanent mark of high temperature resistance.. At the same time, Dongguan and other places carried out centralized interviews with the operation units of power exchange, and 16 enterprises signed a letter of commitment on site to completely remove the excessive batteries with nominal voltage greater than 48V within a time limit..

Therefore, the power exchange operation industry faces a fundamental change. In the past, the core concern of operators of power exchange cabinets was that the battery was not cheap enough and the turnover was not fast enough. Now, the core threshold of the industry has become: Can battery pack clarify the "qualified identity", whether the data link can be traced back to a single cell, and whether the health status of the battery is transparent throughout its life cycle. PACK suppliers that only purchase cell at the Assembly level and compete for the market at low prices are being systematically eliminated.

dongguan Juneng New Energy Technology Co., Ltd. The company performs full inspection and capacity separation in the incoming inspection process of cell, and the capacity deviation is controlled within 1%. The manufacturing base is equipped with automatic laser welding equipment and AI visual inspection system, covering cell key processes such as feeding, scanning code, gluing inspection, welding quality inspection, etc, upload all process data to the MES system for tracing the entire process. The method of "One scenario-one strategy" is adopted in the development of BMS, which can provide a complete solution of voltage acquisition, temperature monitoring, fault warning and communication protocol docking for power exchange scenarios. For power exchange operators who are transforming compliance, choosing a PACK partner that includes coding management and data tracing into the battery PACK solution from the design stage is becoming the basic condition for admission.